Beginners • Pi Zero 2 W: Error -110 on first boot.

I have a Pi Zero 2 W, a Samsung 64GB MicroSD card (I tested it and it reads and writes just fine), and a powered USB hub with an ethernet jack on it.
1: I insert the MicroSD card into a reader and on my Windows computer I run Raspberry Pi Imager v1.8.5.
2: I select Raspberry Pi Zero 2 W as my device, OS Lite (64-bit) as my operating system, and I select the 64GB MicroSD card as storage. I also use OS customization to set a host name, a username and password, I enter my SSID and the password for it, set my locale settings, and also under services I enable SSH.
3: I write to the MicroSD card and it verifies. I remove the MicroSD card.
4: I insert the MicroSD card into my Pi Zero 2 W, and plug power into the USB hub that has the Pi plugged into it, the green light on the Pi comes on, the monitor detects signal in the HDMI and wakes up.
5: I see the same error over and over again -110.

I don't know what is going on as I followed the guides online. I just opened this Pi and it is brand new. Any help to get me to my first successful boot would be greatly appreciated. I am not yet plugging this device with an ethernet cable. The WiFi is 5GHz. I am using an EdgeRouter and a Ubiqiti wireless access point.

Thank you in advance for your help.

Statistics: Posted by hoffcorp — Sat Jun 15, 2024 1:24 am

---