Raspberry Pi OS • Re: New rpi-eeprom-update 2024-01-24 WD Blue SN550 nvme...
I have the same hat as you and the 6.6 kernel but I have to reboot pi 5 by two before the disk worksStatistics: Posted by DaimonS — Thu Feb 01, 2024 5:37 am
View ArticleBeginners • Re: Bookworm (X11 mode) - question about resolution and overscan?
No, KMS is ignoring them. As long as FW is running they should work for you, and when KMS kicks in they get ignored.Yoi need to put them into kernel command line.Statistics: Posted by...
View ArticleAdvanced users • Re: RPi4 fails to connect to wifi to which it used to...
have you tried removing and redoing.sometimes updates can mess things up in ubuntu.Statistics: Posted by kerry_s — Fri Feb 02, 2024 5:45 am
View ArticleAdvanced users • Re: MultiBoot for the Raspberry Pi 5, Raspberry Pi 4, and...
Oops! I missed an additional line in the script that needed NVME support.Try this one.That is working!- Initialized- Renamed- Converted to GPT- Resized- Inserted a new OSBooted back to NVMe.Selected...
View ArticleGeneral discussion • Re: Pico as VERY simple printer controller
I'm a copier/printer tech, and from my experience you need to send the job in whatever language the printer speaks. It is a label printer? Does it do PCL5/6, Postscript 3, PDF, or something...
View ArticleBeginners • Raspberry PI set up wirelass access
Hi, I would like to have a raspberry pi wireless access SSID point.The aim is to connect to the PI and all trafic true the pi should go true vpn to an other pi connected somewere elseI think I should...
View ArticleTroubleshooting • Re: Pi 5 NVMe Boot Issue
Steps to enable Pi5 NVMe boot are in the docu, so will not repeat here.Got to love this kind of elitism... people come in asking for help and there is always someone who dumps a RTFM (or the...
View ArticleClik here to view.
Troubleshooting • Re: Broadcom BCM2837B0 TAxxxx
Thank you very much for your answer Statistics: Posted by blueshoe — Fri Feb 02, 2024 6:02 am
View ArticleAdvanced users • Re: Update tries to put new kernal images in /boot/firmware,...
Note that the OS is Bookworm.I fixed the problem by mounting the network boot directory in boot/firmware.Statistics: Posted by jeremym — Fri Feb 02, 2024 6:07 am
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: INNOLUX AT070TN94 7inch display with...
Were did you get the numbers and clock frequency from?I get the numbers from datasheet that I attached above and from these numbers I calculated the frequency.@pageNo-13, 3.3.2. Data Input Format...
View ArticleTroubleshooting • Problem Installing VS Code
I updated the operating system on my Raspberry pi 4 and attempted to install VS code but I am receiving an error. The error that I get indicates:the following dependencies are not met: libxkbfile1...
View ArticleFrançais • Re: gpio c++
Et voila une version simple qui lit l'identification des capteurs d'un fichier de configuration et ensuite lit à répétition , au 5 secondes environ , les capteurs qui sont envoyés dans une matrice...
View ArticleTroubleshooting • Re: Problem Installing VS Code
My OS is Raspbian GNU Linux 10 release 10that's an old release, not even supported.current version is 12I read that 12 isn't considered stable yet? Is that correct?Statistics: Posted by schwarzd — Sat...
View ArticleGeneral • Re: Pico computations performance settings and tuning
...Here is an extract of the code :...Is double_t like C double? Could you get away with float instead?Without seeing to code it's hard to know where you can optimise it, but one suggestion might be...
View ArticlePython • Pyserial / USB Connection / Arduino / Freeze
Description:1.The issue only happens when I open too many Arduino ports at the same time.2.The mouse and keyboard did not respond, but the program keeps running.3.Once I unplug and plug the USB hub,...
View ArticleOther projects • External USB power on only when Pi is on?
Lots of portable (and non-portable) Pi projects need to provide USB power, but not data, to external devices like screens and drives. It would be convenient to avoid pushing this power through the PI,...
View ArticleRaspberry Pi OS • Re: How is Pi OS performance with a micro sd card?
can you point us to the NVME HAT your using ? does it work out of the box or work a rounds required ?I use this one, it worked fine with the card supplied.https://thepihut.com/products/nvme-base ......
View ArticleGraphics, sound and multimedia • How can I use TC358743 on the RPI5 environment?
Hello. I'm trying to implement software for rendering an image captured using TC358743 (X630 ver 1.5 made by Geekworm) to HDMI on Raspberry Pi 5.I have referred to the following...
View ArticleHATs and other add-ons • Re: Raspberry Pi 5 PCIe Bus Error - ASM1166
To add further to this; today I updated the firmware on the ASM1166 6 port nvme sata card, and no change, though raspbian does not crash on boot now - until I connect a sata drive.still get the same...
View ArticleUbuntu • Re: Geekworm X1003 m.2 nvme pcie Ubuntu image
Adding my data point here: - geekworm X1002 board, (it is slightly different, bottom mount) - nvme Samsung SM961RaspiOS works fine and boots from NVME.Ubuntu (booted from sd-card) can't enumerate the...
View Article