Camera board • Re: Camera module configuration
As you have installed Arducam libraries, you should get support from their channels.Statistics: Posted by naushir — Sat Feb 10, 2024 7:18 am
View ArticlePython • Re: VENV and Missing Package
You created a venv and activated it, but then ran your code with sudo. Sudo does not see your venv so it can't use any of the stuff installed in the venv.When you specify the full path of the Python...
View ArticleClik here to view.
Interfacing (DSI, CSI, I2C, etc.) • Re: 5V pins on the Raspberry Pi 5 are on...
The 3.3V rail should be disabled when powered off.But only if the EEPROM configuration includes "POWER_OFF_ON_HALT=1".Perfect, I have the POWER_OFF_ON_HALT=1 and just tested with the 3.3V and it's...
View ArticleDeutsch • Camera Module 3: Inbetriebnahme auf RPI-OS Bullseye
Moin.Ich habe mir für meinen RPI Zero 2W das "Camera Module 3" bestellt.Auf dem Zero 2W läuft Bullseye Lite.Ich möchte die Kamera gerne als IP-Kamera verwenden, also von außen darauf zugreifen.Wie...
View ArticleSDK • Re: Number of free blocks negative value
okay, I flashed the pico and install micropython again. The os.statvfs('/') shows now the correct (I hope so) result:(4096, 4096, 212, 210, 210, 0, 0, 0, 0, 255).For me the good news is that the...
View ArticleAdvanced users • Re: Running Raspbian from USB Devices : Made Easy
usb-boot (in the first post of this topic) has been updated.Simply replace your existing usb-boot script files with the new ones. No other changes are needed.This update corrects a problem when the...
View ArticleTroubleshooting • Re: Pi5 no green light anymore (red stays on so it results...
Looks like the board got damaged and a transistor (looks like one to me, could be something else) fell off.If the pi works fine, there is no reason to worry about it.Make sure you protect the...
View ArticleAdvanced users • Re: MultiBoot for the Raspberry Pi 5, Raspberry Pi 4, and...
MultiBoot (in the first post of this topic) has been updated.Simply replace your existing 'mb' script file with the new one. No other changes are needed.This update corrects a sporadic error when used...
View ArticleGeneral • Re: WiFi configuration without a display
Seems to me there are two separate problems to solve. One is to get the credentials to get on the WLAN. The other is to find the device once it is on the WLAN. Seems to me that if you assume DHCP you...
View ArticleTroubleshooting • Re: Bluescreen with HDMI to Receiver/Beamer
Not seen that before!Do the same on the second HDMI and make sure you've fully seated the microHDMI connector.The bootloader of your board is quite old, maybe it's due to that. Need to see what my Pi4...
View ArticleCompute Module • Re: USE CM4 SDTV AND HDMEI ON SAME TIME
Sorry, don't understand what you're asking for!If the question is if it is possible to connect two displays (TV) with different resolutions then the answer is yes! Yes, that's possible.A CM4/Pi4/Pi400...
View ArticleClik here to view.
General discussion • Re: Killer Apps and Games for 7 and Under
Tuxpaint for 3 YO and anyone over 90. Statistics: Posted by peterlite — Sun Feb 11, 2024 8:00 am
View ArticleC/C++ • Re: Gcc compilers confusion
Hello everyone i have an rpi 5 with rp Os installedwhich gcc package or packages should i install?thanks everyoneDon't all variants of RasPiOS Bookworm come with a gcc compiler bundled by...
View ArticleC/C++ • C/C++ to mySQL/MariaDB
Apologies for this newly question.My first foray with a Raspberry Pi CM4Hoping to read GPIO pins and put the values into MariaDB(mySQL), but which is the proper way to do it?Value will be entered via...
View ArticleAdvanced users • Re: Boot Bullseye, Buster, or Stretch on a Raspberry Pi 5 :...
Thanks, it helped. But I never got my way. The goal was to get an old image that works on rp5 with two monitors. Apparently there are some problems with the video driver when I comment vc4-fkms-v3d...
View ArticlePython • Sound not working when programming using Python over SSH on...
I have a weird problem where the Sound will play when using Python over VNC using Thonny but not when using SSH and Python through VSCODE. Has anyone experienced this. Im assuming there is permission...
View ArticleBeginners • Re: GPIO pins
Since I'm very new to single board computers, specifically the Raspberry Pi, I am wondering to whether the GPIO pins are the same as Raspberry Pi 4?I can seem to find any information on the internet...
View ArticleTroubleshooting • Re: C++ fgets behaving very oddly on Bookworm
Thanks for al the replies:1. The behaviour occurrs under Bookworm, and I do say that I will test other environments: I will replace the Pi5 with a Pi 4 in order to do that. The subject was intended to...
View ArticleOther programming languages • Re: Scripting help needed - extract a part of...
Thanks, I have another problem concerning the at command:I want to list the current at queue ordered by start time.The atq command results in this hard to read output:Code: $ atq1426 Mon Feb 12...
View ArticleClik here to view.
Troubleshooting • Re: Pi5 power supply use without usbc
So fyi, there are only three wires on this lead. There is the braided outer, a nice thick red wire, and a little green wire.Sending the green wire to ground gives 10.3v between the red wire and the...
View Article