Troubleshooting • Re: Pi5 hanging when transfering large files to NAS
My understanding is the Samba bug hunters are more likely to get interested if Samba running on the Debian PC causes the same hang on the Pi.Every bug report is treated the same, no matter where it...
View ArticleTroubleshooting • Angband graphical errors
So i was playing around with roguelike Angband game on the Pi and it was working just fine until we had a power outage.Today when i was trying to start the game again i get what i would describe as...
View ArticleRaspberry Pi Connect • No connect buttons on "devices" screen
I did something rash the last time I used Connect (I do many rash things every day), and now on the Devices scree, the Device name appears on the lefthand side of the screen, but the two connect...
View ArticleRaspberry Pi Connect • Re: No connect buttons on "devices" screen
I did something rash the last time I used Connect (I do many rash things every day), and now on the Devices scree, the Device name appears on the lefthand side of the screen, but the two connect...
View ArticleOfficial Display • Re: Rpi5 + Touch Display 2 + OS Lite, how to rotate?
Thanks for your reply.So what I have to do is:1. Set video in cmdline.txt to:Code: video=DSI-2:720x1280@60,rotate=902. Set dtoverlay in config.txt to:Code:...
View ArticleTroubleshooting • Re: Docker eating up my ram and not freeing it, is it normal?
Wow, someone registered whole domain just to say "don't panic" and explain this nicely like I'm five. That's cool. What a nice place the world is for a minute.But where is...
View ArticleTroubleshooting • Re: BCM2711 change UART clock
Thank you for pointing to clk-bcm2835.c, it does look like the clock is configured here.However I am still not sure how to change it using an overlay.For the Pi5 it seems to be easier since clock...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • pps0/1: which gpio pin?
Hi,I've added two PPS sources to my raspberry pi zero 2w.In /boot/firmware/config.txt I configured:Code: dtoverlay=pps-gpio,gpiopin=18dtoverlay=pps-gpio,gpiopin=24The pulses come in fine:Code: $ cat...
View ArticleCompute Module • CM4: Is it possible to configure Camera 3 to use I2c1
Using a CM4, is it possible to configure a Camera 3 module to use I2C1. I have GPIO pins 2 and 3 mapped to I2C1, and I have the following...
View ArticleCompute Module • Re: AI Hat+ and GPIO header
Here's the schematic...https://datasheets.raspberrypi.com/m2-h ... matics.pdfJust 5v, 3.3v, gnd and ID pins ?NOPE! That's the schematic of https://www.raspberrypi.com/products/ai-kit/ and not for...
View ArticleGeneral discussion • Re: Installing software with Pi Imager. 'No storage...
After installing the Pi software, inserting the software in the Pi, I then lose the ability to write any programs to the SD card using the Pi Imager. Very frustrating! Is there a code I need to write...
View ArticleGeneral discussion • Re: Raspberry Pi 4 Model B Undervoltage?
You could write a simple bash script that periodically checks the output of "vcgencmd get_throttled" to see if the Under Voltage Detected bit is set, then trigger a shutdown.Statistics: Posted by...
View ArticleOther • Re: Windows ARM64 release?
Anyone had any success with this. I would be keen to play but would like to know it it doable before trying to join the Insider Program.Considering I am a hobbyist I doubt I would be accepted anyway....
View ArticleCamera board • Re: GMSL2 (MAX96714 & MAX96717) video stream problem.
This makes a lot of sense, thank You. I will recompile the kernel using 6.12 and try again.Is there any trick that we could use to somehow bypass libcamera and preview the stream? We do not care about...
View ArticleGraphics, sound and multimedia • Re: First ever development project - Mini TV
Did you know you can get composite video out of a Pi? Might give you more choice of tiny screen.Hi Mike! Yes, it is next to SD port? I'll still stick with the above, especially I got this screen time...
View ArticlePython • Re: stop loop with button press--raspberry pi and gpio
I just got it figured out and working how i want it to. the issue wasnt with how i was trying to read the state of the pin or "button"all methods should and could do what i was trying to do, if i had...
View ArticleGeneral programming discussion • Re: [SOLVED]bash programming compare...
Stepping back a bit, there are 2 points to be made here:1) This is a "dash" vs. "bash" thing. bash takes either = or ==, while dash only likes =.The point here is that while switching to = (rather...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: Waveshare 4inch SPI Display on RPi5
as with all other waveshare customers: they took your money, it's up to them to provide technical product supportHelloIf you have any questions about waveshare products, you can send an email to...
View ArticleRaspberry Pi OS • Re: Debian Bookworm argon1.sh freeze
Issue sent to cs@argon40.com and get confirmation reply.The answer will be posted here.Statistics: Posted by pi3bpfan — Fri Nov 22, 2024 9:22 am
View ArticleCamera board • Re: Event-based Vision Sensor
Raspberry Pi generally don't pre-announce products.The frameworks are all there for 3rd parties to produce camera modules that work with the Pi, hence the various modules from Arducam, Innomaker,...
View Article