Troubleshooting • pi5 keeps locking up
My pi5 loaded up with pi os - latest, keeps locking upfrom what i have seen - when i have left open a ssh terminal, it looks like file access has stopped - I can ping but anything touching a file...
View ArticleTroubleshooting • Raspberry Pi 5 4g not booting
My Raspberry Pi 5 is not booting. When plugged in it shows the red LED as usual, but when I press the power button, there is a brief green flash, and then nothing. I have tried booting it with only...
View ArticleGaming • Wayfire desktop refuses to launch from "ports" in retropie...
I used to be able to launch a pixel desktop from the "ports" menu of retropi when I was running Buster.I tried to pull of the same functionality with the wayfire desktop after switching to Bookworm...
View ArticleRaspberry Pi OS • Re: strange btrfs incompatibility bullseye>bookworm
Great that sdm can now create an image with btrfs rootfs!I haven't looked in the scrips/sourcecode, but I see those 2 things:a) BTRFS warning (device mmcblk0p2): v1 space cache is not supported for...
View ArticlePython • Re: Working with new lirc client 0.10.1
Glad you've had success but you should list the remote being emulated and the target being controlled. If you look for LIRC in this forum you will find others, like myself, who have had frustrating...
View ArticleClik here to view.
Ubuntu • Re: VS Code Pico extension - switching between debug and release builds
"You can toggle between "Debug" and "Release" builds by clicking CMake: [Debug]: Ready in the blue bottom bar. By default, this configuration builds a debug-enabled executable ready for SWD...
View ArticleC/C++ • Re: How to Cross Compile a C++ Program on Ubuntu for 32-bit PiOS on...
You could use armv6-rpi-linux-gnueabihf from https://github.com/tttapa/docker-arm-cross-toolchain.Statistics: Posted by tttapa — Mon Aug 05, 2024 12:36 pm
View ArticleAdvanced users • Re: RPI Secure boot not working as expected
Please find attached the screenshot of logs.With any secure-boot issue please collect the UART logs from power on. The screenshot will not provide enough information to debug.You must also have...
View ArticleGeneral • Re: Need Guidance for Retrigger (Falling Edge) GP14 by using RP...
Much information that would be useful to the discussion are missing. Still don't know how the thingy is actually supposed to work and what is the expected data acquisition performance and...
View ArticleGeneral • Bootloader development in RP2040
Hi All,Currently I am working on the bootloader development. I have never worked on bootloader development.So if anybody can help me on this it would be better. I have tried by searching on line help...
View ArticleNetworking and servers • Re: Accessing VNC from Ubuntu Linux With a Free Client
RealVNC client is now running on both Windows and Ubuntu Linux. Yay!I also got rpi-connect to work, but I still have a problem with it. I will post that on a separate thread.Statistics: Posted by...
View ArticleGeneral • Re: Help Needed: Achieving Long Delays with PIO for Pump Control on...
Or, as I would interpret it -1) Don't do anything until the sensor has read only as full for a period of time2) Turn the pump on to remove water3) Keep pumping until the sensor has read only as not...
View ArticleNetworking and servers • rpi-connect Desktop Disappears
I have two Raspberry Pi's, a 3B and a 4. I enabled rpi-connect on both. If I understand the documentation correctly, I should be able to get shell (command line) access to either, but can get desktop...
View ArticleGeneral discussion • Re: STICKY: PINN - An enhanced version of NOOBS.
An OS normally consists of more than 1 partition. Partitions can be referenced by device node (e.g. /dev/mmcblk0p1), label name (e.g. "share"), Partuuid (e.g. 35c0a7e0-01) or UUID (e.g....
View ArticleCamera board • Re: Raspberry Pi 5 Camera Module 3 Not Working - Detected but...
No help to you but a camera module V3 wide is working OK for me on a Pi5 running latest Bookworm You dont need to add `dtoverlay=imx708` to /boot/config.txt (which is now /boot/firmware/config.txt)No...
View ArticleRaspberry Pi OS • Re: why are there two different splash screens now?
me too.I don't know precisely what this code does, but the reference to shutdown catches me eye (/usr/share/plymouth/themes/pix(pix.script):Code: if (Plymouth.GetMode() != "shutdown"){sprite = Sprite...
View ArticleGeneral discussion • Re: STICKY: Introduce yourself!
Hello Everyone,I enjoy using Raspberry Pi for all things I do in my own time in Linux. Decades of work experience in many many flavours of Linux so I just love the flexibility of what you can achieve...
View ArticleGeneral discussion • Re: New Raspberry Pi Products
There is now a 3rd party HAT+ that includes a HAILO 8L plus an M2 slot for NVMe (with space for 2280). It's a bit more expensive than the official M2 HAT+ and AI kit together but it's a drop in...
View ArticleTroubleshooting • RPi5 only boots to RPi OS
hello, I recently purchased a Rapsberry Pi 5.I've created bootable drives using the Imager for PINN, Kali and Recalbox.I cannot boot into any of them.I purchased 2 new USB flash drives and an SD card...
View ArticleTroubleshooting • Re: Raspberry Pi imager is not working. How can I install...
Raspberry Pi imager keeps giving me the message "Error writing file to disk" while trying to install Ubuntu. How do I install it manually to a micro SD card so that I can use it?Is your target RPi...
View Article